Combination PCR Workstation

Combination PCR Workstation

AC600 series PCR workstations combine ISO 5 HEPA filtered air with UV light irradiation for the ultimate DNA/RNA manipulation and amplification work area.

    Product

    Sku

    Name (required)

    Email (required)

    Phone (required)

    Company(required)

    Country

    Message

    Gallenkamp’s AC600 Series PCR Workstations combine ISO 5 HEPA-filtered air with UV light irradiation for the ultimate DNA/RNA manipulation and amplification work area. Cross-contamination during amplification of DNA and RNA can lead to results that are inaccurate, costing the lab technician valuable time and reagents. PCR Workstations minimize this risk by keeping airborne contaminants away from samples and irradiating work surfaces and tools between amplifications.

    https://www.cdc.gov/coronavirus/2019-ncov/lab/rt-pcr-detection-instructions.html

    RT-PCR Panel for Detection 2019-Novel Coronavirus

    Purpose: This document describes the use of real-time RT PCR (rRT-PCR) assays for the in vitro qualitative detection of 2019-Novel Coronavirus (2019-nCoV) in respiratory specimens and sera. The 2019-nCoV primer and probe sets are designed for the universal detection of SARS-like coronaviruses (N3 assay) and for specific detection of 2019-nCoV (N1 and N2 assays).

    Protocol Use Limitations: The rRT-PCR assays described here have not been validated for platforms or chemistries other than those described in this document.

    Features

    • UVTect™ microprocessor controller
    • No installation required – plugs directly into a standard 110V or 220V electrical outlet
    • ISO 5 vertical laminar flow air
    • No ductwork required
    • UV shelf with built-in pipettor holder
    • Seamless plastic design -no joints or gaps in construction
    • Lab event timer
    • Available in standard height or tall version
    • Clear polycarbonate shell for 360° visibility
    • Extremely quiet operation < 49dBA
    • UV and fluorescent lights
    • Digital UV light timer :01-59 minutes
    • Access port for electrical cords

    Safety Features

    • Automatic sash switch turns blowers off when sash is closed, maintaining an air barrier
    • Filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas
    • Filter safety lockout to ensure correct filter replacement
    • ISO 5 tested
    • Low airflow alarm warns the user both visually and audibly
    • Overlapping polycarbonate sash to prevent UV light exposure
    • Polycarbonate and polypropylene design reflects UV energy
    • Real time monitoring of installed filtration bed
    • Sash safety switch automatically turns off UV light and activates the blower when sash is raised
    • Shipped fully assembled
    • Tested to UL 61010-1,CSA C22.2 No. 61010-1, and EN 61326-1

    Specifications

    External

    Product Number W x D x H (inches) W x D x H (mm)
    SYN-32PWLF-E 32 x 24 x 30 813 x 610 x 762
    SYN-32PWTLF-E 32 x 24 x 39 813 x 610 x 991
    SYN-48PWLF-E 48 x 24 x 32 1220 x 610 x 813
    SYN-48PWTLF-E 48 x 24 x 42 1220 x 610 x 1067

    Internal

    Product Number W x D x H (inches) W x D x H (mm)
    SYN-32PWLF-E 31 x 23 x 18 787 x 584 x 457
    SYN-32PWTLF-E 31 x 23 x 27 787 x 548 x 686
    SYN-48PWLF-E 47 x 23 x 18 1194 x 584 x 457
    SYN-48PWTLF-E 47 x 23 x 29 1194 x 584 x 737

    Accessories

    Product Number Type Description
    SYN-49AUVBL4 PCR accessory Replacement UV bulbs, pack of 4
    SYN-49FHEPA HEPA filter HEPA filter, 99.997% efficient at 0.3 microns
    SYN-49FHEPA18 HEPA filter HEPA filter, 99.997% efficient at 0.3 microns
    SYN-49FLFPRE Pre-filter Pack of 12, prefilters
    SYN-49FLFPRE7 Pre-filter Pack of 12, prefilters

    Make a product enquiry

      Name (required)

      Email (required)

      Phone (required)

      Country (required)

      Product

      Message